Bitumen manufacturers & Bitumen supplier| Asphalt Manufacturers & supplier| petraoil
Call +971564014381
Email: sales@petraoil.com
SCAN QR CODE TO SEND US A WHATS APP MESSAGE
Petra Oil

Performance-Grades-PG70-PG-70-10

Performance Grades

PG-70-10

Performance Grade Bitumen 70-10 is tailored for regions characterized by mild climates and minimal temperature fluctuations. With its exceptional flexibility and crack resistance, this grade ensures the longevity of pavement surfaces even in areas with relatively low thermal stress. Its ability to maintain structural integrity under varying weather conditions makes it a reliable choice for road construction projects in temperate climates. Whether facing moderate traffic loads or occasional temperature changes, PG-70-10 bitumen offers durable pavement solutions, reducing the need for frequent maintenance and repairs.

Advantages:

securestorage

Bitutainers are equipped with locking mechanisms to ensure the security of the bitumen during transport and storage.

lightweight

Corrugated boxes are lightweight, making them easy to handle and transport, especially for smaller quantities of bitumen.

customisation

They can be tailored to specific sizes and weight capacities to meet the requirements of different projects.

temperature-control

The insulation of bitutainers helps to maintain the temperature of the bitumen, preventing it from solidifying or becoming too viscous during transit.

Specification:

Description
Unit
Value
Test Method
Average 7-day Max. Pavement Design Temp
°C
< 70
ASTM D6373
Minimum Pavement Design Temperature
°C
< -10
ASTM D6373
ORIGINAL BINDER
Flash Point Temp, T48: Minimum
°C
230
ASTM D92
Viscosity Max. Test Temperature @ 135 °C
Pa S
3
ASTM D4402
Dynamic Shear, TP5:Min 1.00 kPa test temp@10rad/s
K Pa
1.00
ASTM D6373
ROLLING THIN FILM OVEN (T240)
Mass Loss, Maximum, Percent
%
1.00
ASTM D6
Dynamic Shear, TP5:Min 2.20 kPa test temp@10rad/s
K Pa
2.20
ASTM D6373
PRESSURE AGING VESSEL RESIDUE (PPI)
PAV Aging Temperature
-
100/110
-
Dynamic Shear, TP5:Max 5000 kPa test temp@10rad/s
K Pa
5000
-
PHYSICAL HARDENING REPORT
Creep Stiffness, TP1:S, Max 300.0MPa, Min0.300 test temp@60s
MPa
300 0.30
ASTM D6648
Direct Tension, TP3: Failure Strain, Min 1.0% test temp@1.0mm/min
%
1
ASTM D6648

Request a Quote

    Contact Info

    +971564014381, +9714-3918873
    +254-740111209, +233506464295